Controlling Suction Power - Morphy Richards Vacuum Cleaner Instructions Manual

Controlling suction
power
The suction power can be varied to suit the
surface being cleaned, by using the electronic
suction power regulator. See table for guideline
settings.
Overheating protection
In the event of a motor overload, your
vacuum cleaner will switch off automatically.
Press the on/off switch and let the motor cool
down.
The vacuum cleaner cuts out automatically
when:
• The floor nozzle or tubes become blocked
• Using the vacuum cleaner with a full air box.
• The motor protection filter is very dirty
• The exhaust filter is very dirty
Rectify the cause of the cut out and do not
use for 15 minutes to allow the motor to cool.
Power setting
MIN MAX
MIN MAX
MIN MAX
MIN MAX
5
Application
Curtains
and delicate
fabrics
Textiles and
upholstery
Floor
coverings
such as rugs
or economy
setting
for carpets
Carpets or
hard floor
coverings