14.11 Appendix 11: Diagnosis and parameter setting
For the diagnosis and setting of the parameters either the terminal module or the user
terminal can be used.
This Tool is optionally available (see Appendix 1).
The terminal module (option) is under the housing cover. The user terminal and the USB
adapter of the FrontEndPC can be attached with the appropriate cable to X8 of the
controller.
The buttons and thin-film switches of both of these tools have identical markings and
meanings.
Confirmation button, jump to the next lower menu.
Escape button, return to the above menu
Menu selection button, increases the parameter value
Menu selection button, decreases the parameter value
14.11.1
Terminal module:
Foto 10
14.11.2
HT18 User terminal
Foto 11
36
Rev.01
Operating instructions AT18 SEDM
Issue 09/05