Intermec PW50 User Manual page 25

PW50 Workboard Printer User's Guide
Note: To quickly enable or disable Bluetooth communications, press
and hold the Standby button for more than 2 seconds.
The PW50 cannot initiate a Bluetooth connection. One of the devices,
such as a CN3 mobile computer, must request a connection with the
printer. The PW50 then accepts or rejects the connection. Use
Intermec Settings on the mobile computer to enable the Bluetooth
settings on the PW50.
The PW50 can also connect to Bluetooth scanners such as the SF51
and the SR61. You can create the bar code labels you need to connect
the printer to a Bluetooth scanner using EasySet software. If you are
going to create the bar code labels using EasySet, you need to know
the Bluetooth Device Address and the PIN of the PW50. You can
download EasySet at no charge from the Intermec web site at
www.intermec.com.
Each PW50 equipped with a Bluetooth radio has a unique Bluetooth
Device Address (BDA) loaded into its module when manufactured.
You can find the BDA on the certification label located on the bottom
of the printer.
To set up Bluetooth communications with a mobile computer
1 Make sure that the PW50 is not connected to a serial cable.
2 Follow the procedure to discover and connect to Bluetooth devices
in your mobile computer user's manual.
Note: The default passcode for the PW50 is "1234." For maximum
security, you need to configure a Bluetooth passcode for the PW50.
For help, see the previous section,
page 14.
Chapter 2 — Configuring the PW50
"Configuring the PW50" on
15