Intermec PW50 User Manual page 15

PW50 Workboard Printer User's Guide
Understanding How to Use the PW50 Buttons (continued)
Button Name
Feed
Understanding the Communications, Status, and Battery Indicators
Indicator Name
Communications Off
Status
Battery
Chapter 1 — Using the PW50 Workboard Printer
Functions
Press to advance receipt paper. The amount of media
that feeds depends on the type of media you are using.
Media advances by 5 mm (0.2 in) or feeds a configured
length of media based on your media and settings.
If the printer is printing, pressing this button pauses
printing. Press the button again to resume printing.
State
Steady green
Off
Steady green
Blinking red
Off
Steady green
Steady red
Blinking red
Description
The Bluetooth radio is off.
The Bluetooth radio turns off
when you connect a serial
cable.
The Bluetooth radio is on and
the printer is not connected to
a serial cable.
The PW50 is off.
Ready
Error
Battery is installed and
working properly. The battery
indicator turns off to save
power.
Battery is fully charged in the
PW50 with an external power
supply connected.
Battery is charging in the
PW50 with an external power
supply connected.
Battery is low and there is no
external power supply
connected.
5