Windows Setup - NEC VersaPro VX User Manual

3

Windows Setup

When you first power up your new computer, it is necessary to perform
Windows setup.
Never turn off the power during Windows setup. Turning off the power switch or
pulling out the power cord in the middle of this process may lead to damage.
If there is some sort of problem or you accidentally press the power switch,
please see "If you encounter problems during setup" on p.5.
Important points during setup
O Always follow the procedure written in the manual.
Setup may not be able to be successfully completed if you omit any steps,
press any keys other than the ones indicated on the screen, or operate any
switches.
O Do not connect any external peripherals.
Never connect any peripherals (printers, memory, etc.) other than the items
outlined in "2 Connecting Included Accessories". Please connect or install
such peripherals after "3 Windows Setup" had been completed.
O Do not connect a LAN cable and make sure that the wireless LAN is
turned off.
To ensure safe network connection, only connect a LAN cable or turn on
the wireless LAN after Windows setup and firewall configuration has been
completed.
Be sure to also confirm that the wireless LAN is turned off. (In the default
factory settings, the wireless LAN is turned off.)
O Do not leave the computer alone during setup.
Do not leave the computer unattended until Windows setup has completed
including passing all the screens which require your key operations, and
power OFF.
Preparation for setup
During Windows setup, you are required to enter the name of the person who
will be using the computer (user name), as well as the computer name. Please
choose these names in advance.
4
If two-byte characters, environment-dependent characters, or certain symbols
are used for any part of the user name or computer name, Windows setup may
not be completed, or some applications may not run correctly.
Therefore, it is important that the user name and computer name only includes
single-byte alphanumeric characters and does not contain any symbols or
spaces. The length is also limited to 20 characters.
Turning on the power
1
Open the computer lid.
Please securely support the keyboard side when opening and closing the LCD
display. In order to prevent excess force from being directly applied to the LCD
screen, please handle the screen around the border area.
2
Press the power switch (
Setup Procedure
Start Windows 7 setup.
• You may have to wait for some time for the [Windows 7 Professional] screen
to come up.
• During setup, some parts of the screen may turn black. However, this does
not necessarily mean that there is a problem.
• Please contact your system administrator for appropriate settings during steps
1 to 3, 6, and 7.
1
Once the [Windows 7 Professional] screen comes up, please select
your preferences for the [Country or region], [Time and currency],
and [Keyboard layout] and click [Next] to continue.
2
Enter your user name and computer name when prompted and click
[Next] to continue.
Setup cannot progress to the next step unless you enter a valid user name and
computer name.
3
Enter a user account password when prompted and click [Next] to continue.
4
Please check the contents when the [Please read the license terms]
page is displayed.
).