Table of Contents
Advertisement
Quick Links
42271 rev4
30/7/08
products and lots more, contact us by phone or through our website
Helpline: 0844 871 0953
Replacement parts: 0844 873 0719
Ireland
15:56
Page 1
Steam generators
Ironing system
Please read and keep these instructions
getting the best from your
new steam generator...
• Safety first
Caution must be used when handling this appliance as it
does get very hot. Always switch off the unit and allow to cool
before cleaning or storing.
• Water tank and spray (certain models only)
The water tank can be removed and re-filled at any time
during ironing.
• Performance
To extend the performance and life of your jet stream
generator, ensure that you replace the anti-scale cartridges
regularly.
For replacement parts, help with using your Morphy Richards
UK
1800 409 119
www.morphyrichards.com
Advertisement
Table of Contents
Related Manuals for Morphy Richards Steam Generator
Summary of Contents for Morphy Richards Steam Generator
- Page 1 To extend the performance and life of your jet stream generator, ensure that you replace the anti-scale cartridges regularly. For replacement parts, help with using your Morphy Richards products and lots more, contact us by phone or through our website Helpline: 0844 871 0953...
-
Page 2: Important Safety Instructions
Location • Do not use outdoors or near water. • The steam generator must be used and rested on a stable surface. • When placing the iron unit on the base unit or on it’s heel, ensure that the surface on which the heel or base unit is placed is stable. -
Page 3: Electrical Requirements
Instructions for use Temperature guide Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care Labelling Code. Symbol Do not iron... -
Page 4: Before Use
Filling 1 Place the steam generator on a stable ironing board or table, with the iron resting on it’s stand. 2 Remove the detachable water tank by sliding outwards A. -
Page 5: Steam Ironing
5 Turn the temperature dial on the iron in a clockwise direction, select dot-1, dot-2 or dot-3 according to the recommendation of the garment label. -
Page 6: Anti-Scale System
Align the spray unit with the front of the iron. Fit the bottom location leg into the slot at the front of the handle. Pivot the spray unit towards the iron, making sure it clips firmly in place. Anti-scale system The anti-scale cartridge is designed to... -
Page 7: Vertical Steam
To clean the exterior Allow the steam generator to cool and wipe over with a damp cloth and mild detergent, then wipe with a dry cloth. - Page 8 24 months of original purchase, you should contact the Helpline number quoting Model number and Serial number on the product, or write to Morphy Richards at the address shown. You may be asked to return a copy of proof of purchase.