Flash Options - Vivitar ViviCam X022v2 User Manual

FLASH OPTIONS

Your camera has a built in flash function which enables you to take photos in poor lighting
conditions.
There are several Flash options available on your camera. The options appear on the Photo
Capture Mode LCD screen in sequence.
To change the Flash mode, press the UP /Flash button until you arrive at your desired settings.
Important: When using Flash, stand between 8 to 10 feet away from the scene you would like to
capture.
Flash Type
Forced Off (Default)
Forced On
A
Auto Flash
Note: A "Low Power" message will appear on the LCD screen, if you select the flash function
when the battery power is insufficient. To continue using the camera with the flash, please install
new batteries.
Description
 No flash will appear.
 Use this when you do not want to activate Flash.
 The flash is enabled for each photo.
Note: If you use this option in a well lit environment, your photo may
be appear too bright/light (overexposed).
 When you want the camera to determine if Flash is needed, select
Auto Flash.
 The flash will automatically turn on according to the lighting
conditions.
 When the LED light stops blinking, the Flash is ready for use.
 Note: In some cameras, an initial flash appears to test your
lighting conditions. If flash is needed, a second flash will appear
upon taking the photo.
14