Siemens Service Equipment User Manual - Siemens M65 Service Manual

Hide thumbs Also See for M65:

Table of Contents

S I E M E N S P T E L T D

M65 Level 2 Service Manual

Siemens Service Equipment User Manual

Introduction

Every LSO repairing Siemens handset must ensure that the quality standards are

observed. Siemens has developed an automatic testing system that will perform all

necessary measurements. This testing system is known as:

Siemens Mobile Service Equipment

Using this system vastly simplifies the repair of the phones and will make sure that:

1. All possible faults are detected

2. Sets, which pass the test, will be good enough to return to customer.

Starting from the P35 Series, Siemens will introduce a simpler and faster testing platform

for testing a repaired Siemens mobile phone. The testing platforms are either base on

R&S CMD 53/55 or CTS55 GSM test set.

There is also test software under development for testing with the will'tek 4201S and the

4107 GSM test set.

Level 2.5 service software is also under development for more elaborate testing for the

repair for the 65 series mobile phone.

THE LSO WILL HAVE TO PURCHASE THE SYSTEM, CHOOSING BETWEEN

THE COMPLETE PACKAGE AND SUB-SET OF

F U L L Y

P O S S I B L E I F T H E C O M P L E T E S Y S T E M I S I N S T A L L E D .

Make sure that your CTS firmware is Version 3.01 or higher. For CMD 55 it

must be Version 4.03 and higher. Please check with the Service Info

SB_0500 for the CTS/CMD Hardware Options.

ICM MP CCQ SLI RHQ

A U T O M A T I C

T E S T

Page 23 of 37

IT.

P R O C E D U R E

I S

Siemens Technical Support Centre

Company Confidential

O N L Y

May 2004

Table of Contents