Siemens M65 Service Manual page 16

S I E M E N S P T E L T D
M65 Level 2 Service Manual
Step 11
Separate the Case Gasket from the PCB and Upper
Case.
Step 13
Remove the Keypad + Joystick Cap, SAR Frame and
MMI from the PCB.
Step 15
Remove the Shielding Cover for Camera Module Frame from the PCB as shown. Place the PCB on ESD safe foam.
Copyright © Siemens Pte Ltd.
All Rights Reserved
ICM MP CCQ SLI RHQ
Step 12
Separate the PCB from the Upper Case. Place the PCB
on ESD safe foam.
Step 14
Remove the Display Module, as shown, from the PCB.
Place the Display Module and PCB on ESD safe foam.
Page 16 of 37
Siemens Technical Support Centre
Company Confidential
May 2004