Table of Contents
Advertisement
T E L E P H O N E O P E R A T I O N
Headset jack
Make, answer
or end a call
Access numbers in
telephone memory
Temporary Tone
Store numbers in
telephone memory
Change channels
Making a Call
Press P on the handset and wait for the PHONE
1
light to go on steadily.
2
When you hear a dial tone, dial the number.
Answering a Call
If the handset is in the base, lift the handset. The PHONE
light goes on and the call is connected
— OR —
If the handset is away from the base, press P on the
handset. The PHONE light goes on steadily and the call is
connected.
NOTE: Although ringing stops when you answer, you
might not be able to hear the other party until the PHONE
light goes on steadily.
Ending a Call
Press P on the handset
— OR —
Place the handset in the cradle.
Allows you to
hear caller,
but caller can't
hear you
Access subscriber
services
Redial last
number called
Turn Handset
Ringer off
Adjust handset
volume
Turn Handset Ringer on
Redial
The last number dialed on this phone (up to 24 digits) is
stored in redial memory until you dial another number.
Press P.
1
2
Wait for the dial tone and for the PHONE light to go
on steadily.
When you hear a dial tone, press R.
3
Mute
Mute allows you to hear your caller, but prevents the caller
from hearing you.
1
Press M while on a call.
To return your conversation, press M again.
2
4
Light goes on when
handset is in use
Light goes on when
handset is charging
in base
Send paging tone to
handset
Advertisement
Table of Contents
