3.22
Straight and
Zigzag Stitch
Fitting (Except
20E-910)
Caution
Switch off the
machine.
Zigzag
stitch
Presser
Needle Plate '2' and Feed Dog '3'
are used for straight and zigzag
stitching. (Figure 29)
605652(20U-102/102C/309)
2
606402(20U-112/112C)
606588(20U-109/109C/309)
1
606502(20U-112/112C)
606650(20U-109/109C/309)
606651(20U-112/112C)
Figure 29
Changing the needle plate and feed
dog (Figure 31)
Open
bed
slide,
needle plate, (Use screwdriver '3'
furnished with machine for removal
and replacement of needle plate
and feed dog.)
Using a screwdriver '2' remove bed
plate '1' and remove feed dog '4'.
Foot
'1',
Straight Stitch Presser Foot '1',
Needle Plate '2' and Feed Dog '3'
are used for straight stitching only.
(Figure 30)
3
To replace general purpose or
straight stitch feed dog, fasten feed
dog to machine temporarily and
then
remove
replace general purpose or straight
stitch needle plate. Set feed dog
correctly in position so that it will
not hit the edges of feed dog slots
in the needle plate.
Replace bed plate and press it
firmly in place.
3
4
2
Figure 31
Zigzag Sewing Machine
1
2
606693
606695
Figure 30
1
|
Instruction Manual and Parts List
3
606697
22