Sharper Image SM088 Instruction Manual And Warranty Information page 10

C. The SAP (Super Absorbent Polymer) Pad
REMOVAL OF SAP
When you have finished using your Steam Mop, remove the SAP from the
Sleeve and discard. Or, if it was only used for a small area, leave it in the
Sleeve to use again (see below).
RE-USE OF SAP
We understand that on occasion you will only need to use the SAP for
small jobs. Use your judgement when re-using the SAP, and keep in mind
that too much moisture buildup will cause the Pad to lose it's absorption
capabilities. We recommend limiting re-use of the SAP to three (3) times.
D. The Carpet Pad and Carpet Slide
Use the Carpet Slide and Carpet Pad to clean carpets and rough surfaces.
Placing the Carpet Slide over the Carpet Pad enables your Steam Mop to
slide easily over rough, textured surfaces.
ALWAYS TEST A SMALL, INCONSPICIOUS PORTION OF THE
SURFACE BEFORE APPLYING STEAM.
ATTACH CARPET PAD AND CARPET SLIDE
TO MOP BASE
• Place Carpet Slide face up on floor.
Center and place Carpet Pad on top of
Carpet Slide, wide side forward.
• Hold Steam Mop about 2" above Pad and
gently place Steam Mop on the Pad.
• Firmly press down to assure Carpet Pad
is attached to Steam Mop Base and Mop
Base is securely seated on Carpet Slide.
NOTE: See "Maintenance & Cleaning" for care and
10
Before Use
Carpet Pad
cleaning instructions for Cleaning Pads.
(continued)
Carpet Slide