IKEA RAFFINERAD Manual page 15

ENGLISH
Removing the shelf supports
1
Pull the front of the
shelf support away
from the side wall.
Installing the shelf supports
Install the shelf supports in the opposite se-
quence.
The rounded ends of the shelf supports
must point to the front.
Oven lamp
Warning! Be careful when you change
the oven lamp. There is a risk of
electrical shock.
Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or deac-
tivate the circuit breaker.
Put a cloth on the bottom of the oven
to prevent damage to the oven light
and glass cover.
1. Turn the glass cover counterclockwise to
remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with a 25
watt, 230V (50Hz), 300 °C heat resist-
ant oven light bulb (Connection type:
E14).
4. Install the glass cover.
Cleaning the oven door
The oven door has three glass panels. You
can remove the oven door and the internal
glass panels to clean them.
2
2
1
Pull the rear end of
the shelf support
away from the side
wall and remove it.
The oven door can close if you try to
remove the glass panels before you re-
move the oven door.
Removing the oven door and the glass
panels
1
Open the door fully.
3
Close the oven door
to the first opening
position (halfway).
Then pull forward
and remove it from
its seat.
15
2
Lift and turn the lev-
ers on the two hing-
es.
4
Put the door on a
soft cloth on a sta-
ble surface.