Table of Contents
Advertisement
Stowing the spare and jack (utility)
1. Replace the wheel chock in the foam tray.
A
B
3. Place the jack in the foam tray and secure it with the attached strap.
4. Place the foam tray over the mounting bracket on the floor of the
spare tire well.
5. Replace the spare over the jack and secure with wing nut.
2013 Police (pol)
Owners Guide gf, 2nd Printing
USA (fus)
Wheels and Tires
2. Adjust the jack to the proper
height to install the wrench. Turn
the jack lead screw until the arrow
on the upper link is slightly below
the circle indicator shown on the
lower link.
Push the button (A) to retract the
wrench handle and place the
wrench over the raised tab on the
lower link and drop the tang (B)
through the hole in the diagonally
opposite upper link. Turn lead
screw of jack clockwise until the
arrow aligns with the circle
indicator to secure the wrench onto
the jack.
283
Advertisement
Table of Contents
