Table of Contents
Advertisement
1 ambient-light sensor board
Replacing the Ambient-Light Sensor Board
1. Follow the instructions in
2. Align the ambient light-sensor board with the alignment post on the display frame and place it in position.
3. Connect the ambient-light sensor cable to the connector on the ambient- light sensor board.
4. Replace the display panel (see
5. Replace the display hinges (see
6. Replace the display bezel (see
7. Replace the hinge caps (see
8. Replace the display assembly (see
9. Replace the memory module (see
10. Replace the battery (see
11. Replace the palm-rest assembly (see
12. Replace the keyboard (see
13. Replace the label door (see
CAUTION:
result in damage to the computer.
Back to Contents Page
More user manuals on
2
ambient-light sensor cable
Before You
Begin.
Replacing the Display
Replacing the Display
Replacing the Display
Replacing the Hinge
Caps).
Replacing the Display
Replacing the Memory
Replacing the
Battery).
Replacing the Palm-Rest
Replacing the
Keyboard).
Replacing the Label
Door).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
ManualsBase.com
Panel).
Hinges).
Bezel).
Assembly).
Module).
Assembly).
Advertisement
Table of Contents
