Function menu
The Function menu is used for changing the settings of the function of the
projector.
Picture
Signal
Function
Installation
Setup
Information
Item
Smart APA
Auto Input Search
Standby Mode
Power Saving
Smart APA :
On
Auto Input Search :
O f f
Standby Mode :
Standard
Power Saving:
O f f
Sel:
Set:
Back:
Exit:
Description
With this item set to On, the APA function works automatically for a
signal input from a computer so that the picture can be seen clearly.
You can also activate the APA function by pressing the APA button
on the remote control.
Tip
The APA (Auto Pixel Alignment) automatically adjusts the input
signal from a computer so that the picture can be seen clearly.
When set to On, the projector detects whether Component, HDMI,
Video, S Video or Input-A signal is input when the projector is
turned on or the INPUT button is pressed. Then the detected input
channel is automatically displayed. Set to Off when you want to
switch the input channel manually.
When set to Low, the power consumption in standby mode is
lowered.
When set to On, the POWER SAVING indicator lights. The
projector goes into power saving mode if no signal is input for 10
minutes, and the lamp goes out and the cooling fan keeps running. In
power saving mode, no button functions for the first 60 seconds,
then it is cancelled when a signal is input or any button is pressed. If
you do not set the projector to power saving mode, select Off.
41
Function menu