Projecting
This section describes how to operate the projector to view the picture from the
equipment connected to the projector. It also describes how to adjust the
quality of the picture to suit your taste.
Projecting the Picture on the Screen
LIGHT
DYNAMIC
USER 1
1
Plug the AC power cord into a wall outlet.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the I/1 (on/standby) switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3
Turn on the equipment connected to the projector.
Refer to the operating instructions of the connected equipment.
INPUT
STANDARD
CINEMA
PICTURE MODE
USER 2
USER 3
ENTER
STANDBY
STANDBY
VPL-HS50
Focus ring
Remote control detector
VPL-HS51
Remote control detector
Zoom ring
Focus ring
Lights in red.
ON/
Lights in green.
ON/
Projecting the Picture on the Screen
Zoom ring
23