Using The "Map Location" Screen - Pioneer AVIC-F77DAB Operation Manual

Searching for a destination
4 Touch [Select as Destination].
After touching [Select as Destination], the
"Route Summary" screen appears and count-
down begins. When the countdown ends, the
guidance automatically starts. If the screen is
touched anywhere during the countdown, the
countdown stops and the screen will stay as it
is.
= For details on the operations in the "Route
Summary" screen, refer to Checking route
information and preferences on page 44.
5 Touch [Start Navigation].
Your navigation system starts the route gui-
dance.
= For details of the route guidance, refer to
Understanding the route guidance on page
30.
Using the "Map Location"
screen
Once a location is searched, the "Map Loca-
tion" screen appears. You can select some op-
tions for the route or displayed map location
before route calculation.
1 2 3
5
p If you touch the map, the cursor is placed
at that position. Also, you can scroll the
map by dragging the map.
1 Zoom in/zoom out
p You can also pinch or expand the map
to zoom in or out.
2 Cancels the "Map Location" screen and dis-
plays the map of the current position.
4
6 7
3 Returns the cursor to the initial position and
the map scale to the initial scale.
4 Shows the route setting preferences for route
calculation. Touch the keys to activate or deac-
tivate the preference.
Calculates the route prioritising
the use of motorways when the
key is activated.
Calculates the route prioritising
the use of per-use charged toll
roads when the key is activated.
Calculates the route prioritising
the use of ferries when the key
is activated.
Calculates the route prioritising
the use of carpool and HOV
lanes when the key is activated.
5 Returns to the previous screen.
6 Sets the cursor position to your destination (or
waypoint).
7 Displays the shortcuts.
! Detailed Information:
Shows the detailed information of the
point.
! Save Location:
Saves the displayed location as your fa-
vourite location. The saved location can
be easily recalled later.
! Places Around Cursor:
Searches for POIs around the displayed
location. Touch the POI to show the
"Map Location" screen, and also set
the POI as the destination (or
waypoint).
Chapter
05
41
Engb