Table of Contents
Advertisement
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in con-
formity with the following standards or standardiza-
tion documents: EN 60745 according to the
provisions of the directives 89/336/EEC, 98/37/EC
(until Dec. 28, 2009), 2006/42/EG (from Dec. 29,
2009 on).
07
Adolf Würth GmbH & Co. KG
P. Zürn
Mounting the Protective Devices
❏ Before any work on the machine itself,
pull the mains plug.
Protection Guard for Sanding
Adjust the position of the protection guard 7 to the
requirements of the work process. For this, press the
release lever 1 upward and turn the protection
guard 7 to the required position.
❏ Adjust the protection guard 7 in such a
manner that sparking is prevented in the
direction of the operator.
❏ The protection guard 7 may be turned
only upon actuation of the release lever 1!
Otherwise the power tool may not con-
tinue to be used under any circumstances
and must be taken to an after-sales serv-
ice agent.
Note: The encoding keys on the protection guard 7
ensure that only a protection guard that fits the
machine type can be mounted.
1 609 929 L48 • 15.6.07
R. Bauer
Place the protection guard 7
onto the spindle collar as
shown in the illustration. The
triangle marks on the protec-
tion guard must correspond
with the respective marks on
the gear case.
Press the protection guard 7
onto the spindle collar until
the shoulder of the protection
guard is seated against the
flange of the machine, and
turn the protection guard
until it can clearly be heard to
engage.
Protection Guard for Cutting
❏ For cutting metal, always work with the
protection guard for cutting 8.
The protection guard for cutting 8 is mounted in the
same manner as the protection guard for sanding 7.
Auxiliary Handle
❏ Operate your machine only with the auxil-
iary handle 5.
Screw the auxiliary handle 5 on the right or left of the
machine head depending on the working method.
Vibration-dampening Auxiliary
Handle
The vibration-dampening auxiliary handle reduces
the vibrations, making operation more comfortable
and secure.
❏ Do not make any alterations to the auxil-
iary handle.
Do not continue to use an auxiliary handle if
it is damaged.
Hand Guard
❏ For operations with the rubber sanding
plate 15 or with the cup brush/wheel
brush/flap disc, always mount the hand
guard 14.
The hand guard 14 is fastened with the auxiliary
handle 5.
Mounting the Grinding Tools
❏ Before any work on the machine itself,
pull the mains plug.
❏ Grinding and cutting discs become very
hot while working; do not touch until they
have cooled.
Clean the grinder spindle 6 and all parts to be
mounted.
For clamping and loosening the grinding tools, lock
the grinder spindle with the spindle lock button 2.
❏ Actuate the spindle lock button only when
the grinder spindle is at a standstill. Oth-
erwise, the machine may become damaged.
Grinding/Cutting Disc
Pay attention to the dimensions of the grinding tools.
The mounting hole diameter must fit the mounting
flange without play. Do not use reducers or adapt-
ers.
English–19
Advertisement
Table of Contents
