Yamaha Raptor YFM7RZ Owner's Manual page 34

Tightening torque:
Locknut:
42 Nm (4.2 m·kgf, 30 ft·lbf)
Rebound damping force
Turn the rebound damping force adjusting screw in
direction (a) to increase the rebound damping
force and thereby harden the damping, and in di-
4
rection (b) to decrease the rebound damping force
and thereby soften the damping.
1. Rebound damping force adjusting screw
2. Position indicator marks
(a)
1
(b)
Rebound damping setting:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
12 click(s) in direction (b)*
Maximum (hard):
3 click(s) in direction (b)*
* With the adjusting screw fully turned in direc-
tion (a)
TIP
Make sure that the position indicator marks are
aligned when the shock absorber assembly is set
to the standard setting.
Compression damping force
Compression damping force (for fast compression
2
damping)
To increase the compression damping force and
thereby harden the compression damping, turn the
compression damping force adjusting bolt in direc-
tion (a). To decrease the compression damping
force and thereby soften the compression damp-
ing, turn the adjusting bolt in direction (b).
4-16