1. Quick fastener screw
2. Bolt
2. Pull the cowling slightly outward as shown.
1
2
1. Cowling
2. Brake fluid reservoir cap
3. Remove the brake fluid reservoir cap, and
then refill with brake fluid.
4. Install the brake fluid reservoir cap.
5. Place the cowling in the original position, and
then install the bolt and quick fastener screw.
Observe these precautions:
G
When checking the fluid level, make sure that
the top of the brake fluid reservoir is level.
G
Use only the recommended quality brake fluid,
otherwise the rubber seals may deteriorate,
causing leakage and poor braking performance.
8-30
1
2
8