Table of Contents
Advertisement
100
Utilities
Sleep Utilities
Enabling/Disabling USB Sleep and Charge
This utility can be used to enable or disable the USB Sleep
and Charge function. To enable this function, select
To disable this function, toggle the Enable button to the
Disabled
You can also control whether charging takes place when the
computer is running on battery power. To do so, toggle the
Function under Battery Mode
or
Disable
If you enable charging when the computer is running on
battery power, you can specify that charging stops when
battery power drops below a certain level. Use the slider at
the bottom of the utility window (beneath the "Disable
features when the battery level reaches 10%" heading) to
specify when charging should stop. For example, if you set
the slider to 10%, charging will stop when 10% or less of the
battery power remains.
Power supply mode settings
Your computer may provide two different charging modes, to
support various types of USB devices. If your computer
provides more than one charging mode, the charging mode
you should select depends on the USB device you want to
charge. For example,
mode, will charge a wide variety of digital audio players. If
your device does not charge in Auto Mode, try using
Alternate Mode
the
Power supply mode
NOTE
Metal paper clips or hair pins/clips will generate heat if
they come into contact with USB ports. Do not allow
USB ports to come into contact with metal products, for
example when carrying the computer in your bag.
position.
this function.
. To select a different charging mode, use
With certain external devices, the USB Sleep and Charge
function may not work no matter which charging mode
you select. In those cases, disable USB Sleep and
Charge in the utility and turn the computer on to charge
the device, or use a different charging device.
Enable button to
, which is the default
Auto Mode
drop-down list in the utility.
.
Enable
Enable
Advertisement
Table of Contents
