Fujitsu CREMSON MODULAR STARTERKIT User Manual page 25

Jumper Description
JP1 Direct DC-Input (9-12V) Vcc/Gnd array for testpurposes
JP2 5V Vcc/Gnd array for testpurposes
JP3 3.3V Vcc/Gnd array for testpurposes
JP4 2.5V Vcc/Gnd array for testpurposes
JP5 2.5V Vcc/Gnd array for testpurposes
JP6 2.5V Vcc/Gnd array for testpurposes
JH1 MCU Peripherals 1
JH2 MCU Peripherals 2
TP1 GND Testpin
TP2 Monitor Clock output of MCU Testpin
JDH1 Bus connector for graphic subboards
JDH2
Table 2: Grouped jumpers on CPU Starterkit (see schematics for pin assignment!)
Refer to the schematics of the CPU-board for details on the pin-assignment of the
grouped jumpers !
© Fujitsu Microelectronics Europe GmbH
Cremson Modular Starterkit
Chapter 6 CPU Board Hardware
- 25 -