Page 1
Type 2A Models Type 2A Models Type 2A Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
• To reduce the risk of fire, electrical shock, or motor damage, do not 8 • Completing Your Installation With or use a solid-state speed control with this fan. Use only Hunter speed Without a Bowl Light Fixture ..13 controls, which are solid state.
Page 3
If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
Page 4
ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 42834-01 • 02/14/12 • Hunter Fan Company...
Page 5
To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls. Low Profile Mounting fits close to the ceiling, recommended for ceilings less...
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 3” Wood Screw Steps 2-4 – 2-6 42834-01 • 02/14/12 • Hunter Fan Company...
3-3. Install two locking screws through the holes in the side of the Square Hanger metal bracket to secure the square hanger. Motor Green Assembly Ground Wire Step 3-2 Green Ground Wire Step 3-3 #8-32 x 1” Screw Locking Screw 42834-01 • 02/14/12 • Hunter Fan Company...
4-8. Return to the fan so you can complete the fan wiring. Step 4-1 Steps 4-6 – 4-7 Steps 4-2 – 4-3 Steps 4-4 – 4-5 3mm (1/8") Support Brace Outlet Box Braided Ceiling Cable 42834-01 • 02/14/12 • Hunter Fan Company...
5-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42834-01 • 02/14/12 • Hunter Fan Company...
6-3. Install the two remaining canopy screws into the holes in the fan housing and into the hanger bracket. Securely tighten all screws. 6-4. Install the rubber plugs into the holes over the canopy screws. Step 6-3 Canopy Screw Step 6-4 42834-01 • 02/14/12 • Hunter Fan Company...
7 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 7-1. Install the grommets into the blades by hand. Step 7-1 (Detail) 7-2. Place each blade between a blade iron and medallion. Install three blade screws to attach the medallion to the blade iron.
8 • Completing Your Installation With or Without a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture.
Page 14
Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. Lower Switch Housing Plug Connector Detail Housing Assembly Screw 42834-01 • 02/14/12 • Hunter Fan Company...
Page 15
Glass Bowl restricts its light output. Exceeding the wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may Cover Plate result in fire hazard or improper operation. Finial 42834-01 • 02/14/12 • Hunter Fan Company...
Page 16
8-19. Install the switch housing cap and plug button to the lower switch housing. 8-20. Once you have uninstalled the light fixture, continue with step 8-6. Step 8-17 Male Dummy Terminal Female Dummy Terminal Plug Button Step 8-19 42834-01 • 02/14/12 • Hunter Fan Company...
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 42834-01 • 02/14/12 • Hunter Fan Company...
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42834-01 • 02/14/12 • Hunter Fan Company...