Monessen Hearth DEB30 Installation And Operating Instructions Manual page 24

ELECTRICAL WIRING (MILLI-VOLT)
5. Route wiring harnesses through large hole on side of unit. Mount bracket to side of unit with screw provided. See Figure
22.
6. Attach wiring harness to either TP/TH and TH on control valve or to existing wiring harness with two (2) 0.250" male
spade terminals for remote or t-stat option. See Figures 22 and 23.
7. Install knob to shaft of t-stat sensor. See Figure 22.
8. Place thermo bulb in front of the firebox for incoming air.
24
Knob
Thermo Bulb
Figure 22 - Installing T-Stat Sensor to DEB Base
with Screw Provided
Wiring Harnesses
Figure 23 - Attaching Wiring Harnesses to Control Valve
Wiring Harnesses
Screw
T H
E R
M O
S E
T T S T
I N G A T
H I
G H
T-Stat
2 6
D 3
3 1
7 L O Sensor and
W
Bracket
TH
TP/TH
44D0060