The Added Instruction For R/C Buttons; A (Flashback); E (Mute); Mpx - Sharp LC-60UF30H Operation Manual

Watching TV

The added instruction for R/C buttons

A (Flashback)

Press A to switch the currently tuned channel or
external input source to the previously tuned channel
or external input source.
Press A to switch the currently tuned channel
1
or external input source to the previously tuned
channel or external input source.
Press A again to switch back to the currently
2
tuned channel or external input source.

e (Mute)

Using e (Mute) on the remote control unit
current sound output.
Press e (Mute).
1
• The sound is silenced.
• " " is displayed while the mute function is on.
Press e (Mute) again to cancel the mute, the
2
sound can return to the original setting.

MPX

You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
Each time you press MPX the mode switches as
follows.
In the NICAM TV broadcasts
Signal
When receiving a NICAM STEREO , MONO
stereo signal
When receiving a NICAM DUAL Ⅰ , NICAM DUAL Ⅱ ,
bilingual signal NICAM DUAL Ⅰ + Ⅱ , MONO.
When receiving a NICAM MONO, MONO
monaural signal
In the TV mode of A2 TV broadcasts
Signal
When receiving a STEREO, MONO
stereo signal
When receiving a CH A, CH B, CH AB
bilingual signal
When receiving a MONO
monaural signal
NOTE
• Select the sound multiplex for ATV only.
24
Display the channel list of DTV.
The EPG(Electronic Programme Guide) is broadcasted
together with DTV. The TV screen shows the EPG
when the viewer presses EPG on the remote
to mute the
control, provided that the TV is receiving the digital
broadcasting signal. The EPG enables you to check
the schedule of DTV, view detailed information.
Mode switch
• The time displayed on the EPG is information sent by the
Mode switch

GUIDE

Press GUIDE, and then display the "Channel
1
List" of DTV on the screen.
Press a/b to select the desired channel , and
2
then press ENTER to switch to the selected
channel.
• When received a encryption program that cannot
be played, it will display the

EPG

Press the EPG on the remote control to
1
display EPG screen.
Press a/b to select the desired channel , and
2
press ENTER. The programme of the selected
channel displays.
Press a/b/ c / d and ENTER to display
3
programme information.
NOTE
TV station.
key icon.
" "