Replacing The Memory - Lenovo ideapad 300-14ISK User Manual

Hide thumbs Also See for ideapad 300-14ISK:
Table of Contents

Advertisement

Replacing the memory

You can increase the amount of memory in your computer by installing
double data rate three synchronous dynamic random access memory
(DDR3L SDRAM)-available as an option-in the memory slot of your
computer. DDR3L SDRAM modules are available in various capacities.
Notes:
Use only the memory types supported by your computer. If you incorrectly install
optional memory, or install an unsupported memory type, a warning beep will sound
when you try to start the computer.
Make sure the computer is turned off and all the cables disconnected from the computer
before you replace the memory.
Make sure the computer display is closed to avoid being damaged.
To install a DDR3L SDRAM module, do the following:
1 Touch a metal table or a grounded metal object to reduce any static
electricity in your body, which could damage the DDR3L SDRAM. Do
not touch the contact edge of the DDR3L SDRAM module.
2 Remove the screws a, and then remove the bottom slot cover b.
1
1
2
Appendix A. CRU instructions
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ideapad 300-17iskIdeapad 300-15isk

Table of Contents