Replacing the memory
You can increase the amount of memory in your computer by installing
double data rate three synchronous dynamic random access memory
(DDR3L SDRAM)-available as an option-in the memory slot of your
computer. DDR3L SDRAM modules are available in various capacities.
Notes:
•
Use only the memory types supported by your computer. If you incorrectly install
optional memory, or install an unsupported memory type, a warning beep will sound
when you try to start the computer.
•
Make sure the computer is turned off and all the cables disconnected from the computer
before you replace the memory.
•
Make sure the computer display is closed to avoid being damaged.
To install a DDR3L SDRAM module, do the following:
1 Touch a metal table or a grounded metal object to reduce any static
electricity in your body, which could damage the DDR3L SDRAM. Do
not touch the contact edge of the DDR3L SDRAM module.
2 Remove the screws a, and then remove the bottom slot cover b.
1
1
2
Appendix A. CRU instructions
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
33