Table of Contents
Advertisement
With the help of the following notes minor faults in the performance of the appli-
ance, some of which may result from incorrect operation, can be put right without
contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a suit-
ably qualified person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The man-
ufacturer cannot be held liable for unauthorised work.
The chart is divided into the following sections to help you:
– The programme does not start.
– The wash programme stops and a fault indicator light comes on.
– A fault indicator light comes on but the wash programme continues as normal.
– General problems or an unsatisfactory wash result.
– The drum door cannot be opened by pressing the Door button.
The programme does not start.
Fault indicator
The Anti-crease/Finish
indicator light is not on,
or the START indicator
light is not flashing.
The check light locked
is flashing.
The programme does
not start when Drain/Fi-
nal spin has been se-
lected.
Possible cause
There is no power.
The system lock has been
activated.
The washing machine has
not been prepared for us-
ing for the first time.
Problem solving guide
Remedy
Check that
– the mains plug is
plugged in.
– the fuse or circuit
breaker has not trip-
ped.
Deactivate the system
lock.
Prepare the machine as
described in "Before us-
ing for the first time".
37
Hide quick links:
Advertisement
Table of Contents
