Call Forwarding In The Carrier Network And Forwarding Multiple Subscriber Numbers (Msn) (Not For U.s.) - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Trunk FWD on?
1=immediate?
2=on no answer?
3= on busy?
e
or
Save?
Call Forwarding in the Carrier Network and
Forwarding Multiple Subscriber Numbers
(MSN) (Not for U.S.)
If this function has been configured (contact your ser-
vice personnel), you can forward calls to your assigned
multiple subscriber number (MSN) (DID number) direct-
ly within the carrier network.
For example, you can forward your phone line to your
home phone after business hours.
Select and confirm.
or
qjh
Enter the code.
Select and confirm the line type you wish to use.
or
or
or
f g
or Enter the code.
o
Enter your DID number.
o
Enter the destination number (without the external
code).
Confirm.
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.
If you are a call forwarding destination, your dis-
play will show the station number or the name of
the originator on the upper line and that of the
caller on the lower line.
Making Calls – Basic Functions
23