Updating Model Information After Replacing The Fb1 Board - Sony KDL-52XBR4 Service Manual

2-3. UPDATING MODEL INFORMATION
AFTER REPLACING THE FB1 BOARD
Complete the following steps to reset the model information to the
correct size after replacing the FB1 Board.
1. Access the Service Menu by pressing the following buttons on the
Remote Commander within a second:
Channel 5
DISPLAY
The service menu displays.
JUMP
2. Press the button until the BEM micro service menu displays.
BEM
BOOT:
MAIN:
DATA:
3. Press 2 until the 0001 MODEL_INFO category displays.
BEM
0001 MODEL_INFO
0001 PANEL_SIZE
DIFF
4. Press 3 to increase the value to 2.
5. To write to memory, press MUTING then 0 on the Remote
Commander.
8. To exit service mode, turn the power off.
KDL-52XBR4/52XBR5
Volume + TV POWER .
SERVICE
0. 026W00AU
0. 050W00AU
0. 049A00LUW
SERVICE
0
Update
according to
1
panel size
KDL-52XBR4/52XBR5
21