Suds Cooling - Miele WDA 210 WPM Operating Instructions Manual

Programmable functions

Suds cooling

When this is activated, additional wa‐
ter flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when the
Cottons 90°C programme is selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
– The machine is delivered with Suds
cooling deactivated.
Follow steps  to  to programme
and store in memory.
The programmable functions are ac‐
cessed via the Start button and the pro‐
gramme selector.
Before you begin, ensure the following:
– The washing machine is switched off.
– The machine door is closed properly.
– The programme selector is at Finish.
66
 Press the Start button and keep it
pressed in whilst carrying out steps
 to .
 Switch machine on with the  but‐
ton.
 Wait until the indicator light for the
Start button lights up constantly . . .
 . . . and then release the Start but‐
ton.
 Turn the programme selector to Cot‐
tons 40°C.
A  will flash in the display alternating
with the number  or .
 Pressing the Start button switches
the programmable function on or off.
If  flashes in the display alternating
with the number , the programma‐
ble function is switched on. If 
flashes in the display alternating with
the number , the programmable
function is switched off.
 Switch the washing machine off with
the  button.