IBM eServer 342 xSeries User Reference Manual page 68

11. To install an IDE device, such as a CD-ROM drive or a DVD-ROM drive, use the
12. If you have other options to install or remove, do so now; otherwise, go to
54
IBM xSeries 342: User's Reference
Note: If you want to install more than one optional SCSI 5.25-inch device,
install an optional SCSI adapter to control the device.
b. Connect a power cable to the back of the drive. Power cables for non-hot-
swap drives come installed in your server. They are bundled together in the
area behind the CD-ROM drive. The connectors are keyed and can be
inserted only one way.
c. Continue with step 12.
two-drop IDE cable that comes with the option:
a. Remove the cable connecting the CD-ROM drive to the IDE connector on the
system board.
b. Remove the power cable connected to the original CD-ROM drive.
c. Using the two-drop cable that came with your IDE option, connect the IDE
device to the IDE connector on the system board.
d. Connect the new IDE device to a connector on the power cable.
e. Set the jumper on the back of the new IDE device to subordinate.
"Installing the server cover and bezel" on page 66.