Setting The Time And Using The Timer; Setting The Current Time - Samsung UN40J6200AFXZA E-Manual

Setting the Time and Using the Timer

Setting the Current Time

MENU > System > Time
Set the clock manually or automatically.
To view the time after the clock is set, press the
"
The clock must be reset every time the power is disconnected.
Setting the Clock using Digital Broadcast Info
MENU > System > Time
Set Clock Mode to Auto. The TV automatically downloads the correct time from a digital channel. To
enable this option, the TV's Antenna jack must be connected to either an antenna or a cable output
and must be receiving digital broadcasts. The accuracy of the time information received may vary
depending on the channel and signal. If your TV is connected to a set-top-box or satellite box using
HDMI or Component connections, you must set the time manually.
If the Clock is Wrong in Auto Mode...
MENU > System > Time
If the time the TV sets automatically is incorrect, you can offset the clock in 1-hour increments by as
much as -/+ 12 hours. Select
correct time.
"
Time Offset adjusts the time through a network connection and is only available if the
Auto and the TV is connected to the Internet though a local area network.
"
Time Offset adjusts the time if the TV fails to receive time information through normal digital broadcast
signals.
> Clock
Try Now
> Clock > Clock Mode
> Clock > Time Offset
System > Time
INFO button on your remote.
Try Now
Try Now
> Clock > Time Offset, and then offset the clock to the
Clock Mode is set to