Answering System Mode; Call Intercept - AT&T E2912 User Manual

1.
ANSWER ON until the
system announces "Calls will
not be answered."
2.
"Beep,"
The system has been
turned off.
- OR -
1.
ANSWER ON until
the system announces
"Calls will be answered." Calls will be answered." ."
2.
"Beep."
The system has been
turned on.
Answering system operation

Answering system mode

The answering system's default factory setting is
ON in order to answer and record messages. You
can turn the answering system off, but if you do
so, the answering system will not answer calls or
record incoming messages.
To turn the answering system off
Press
ANSWER ON
answered" and a confirmation beep. The
light will be turned off.
NOTE: If the answering system is off and someone calls,
the telephone will ring 10 times then answer and
announce "Please enter your remote access code." Enter
your remote access code to enter remote access mode
(page 38). If you do not enter the correct remote
access code, the call will be ended automatically.
To turn the answering system on
Press
ANSWER ON
answered" then a beep to confirm the ON setting.
The
ANSWER ON
Call screening
If the answering system is on and the base speaker
volume is not off, you will hear the announcement
and the incoming message when a call comes in.

Call intercept

While you are call screening, you can intercept
the call by pressing
on the handset.
42
until you hear "Calls will not be
until you hear "Calls will be
light will be turned on.
PHONE/
FLASH
ANSWER ON
SPEAKER
or