Features And Controls - PowerBoss 030542 Operator's Manual

Features and Controls

Read this Operator's Manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
A - Fuel Tank — Capacity of two (2.0) U.S. gallons (7.6 l).
B - On/Off Switch — Set this switch to ON (I) before using
recoil starter. Set switch to OFF (0) to switch off engine.
C - Circuit Breaker (AC) — The 120 Volt AC, 20A duplex
receptacle is provided with a "push to reset" circuit
breaker to protect the generator against electrical
overload.
D - 120 Volt AC, 20 Amp, Duplex Receptacle — May be
used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical,
lighting, appliance, tool and motor loads.
E - Oil Fill Cap/Dipstick — Check and add engine oil here.
F - Oil Drain Plug — Drain engine oil here.
G - Grounding Fastener — Consult your local agency having
jurisdiction for grounding requirements in your area.
H - Recoil Starter — Used to start the engine manually.
J - Fuel Shutoff Lever — Used to turn fuel supply on and off
to engine.
K - Choke Lever — Used when starting a cold engine.
L - Air Cleaner — Protects engine by filtering dust and
debris out of intake air.
M - Spark Arrester Muffler — Exhaust muffler lowers engine
noise and is equipped with a spark arrester screen.
Items Not Shown:
Engine Identification — Provides model, type and code of
engine. Please have these readily available if calling for
assistance.
Identification Label — Provides model and serial number of
generator. Please have these readily available if calling for
assistance.
M
L
K
J
H
9