Stopping The Engine - Honda GX630 Owner's Manual

12/03/06 12:33:00 32ZCN600_005
3. Move the throttle lever away from the MIN. position, about 1/3
of the way toward the MAX. position.
M M I I N N . .
Some engine applications use a remote-mounted throttle control
rather than the engine-mounted throttle lever shown here. Refer to
the instructions provided by the equipment manufacturer.
4. Turn the engine switch to
the ON position.
O O N N
5. Operate the starter.
Turn the engine switch to the START
position, and hold it there until the
engine starts.
If the engine fails to start within 5
seconds, release the engine switch,
and wait at least 10 seconds before
operating the starter again.
Using the electric starter for more than
5 seconds at a time will overheat the
starter motor and can damage it.
When the engine starts, release the
engine switch, allowing it to return
to the ON position.
M M I I N N
THROTTLE LEVER
O O N N
ENGINE
SWITCH
START
O O N N
START
ENGINE
SWITCH
6. Warm up the engine for 2 or 3 minutes.
7. If the choke knob was pulled to the CLOSED position to start the
engine, gradually push it to the OPEN position as the engine
warms up.
C C L L O O S S E E D D
. .
CHOKE KNOB

STOPPING THE ENGINE

To stop the engine in an emergency, simply turn the engine switch
to the OFF position. Under normal conditions, use the following
procedure. Refer to the instructions provided by the equipment
manufacturer.
1. Move the throttle lever to the MIN. position.
Some engine applications use a remote-mounted throttle
control rather than the engine-mounted throttle lever shown
here.
M M I I N N . .
2. Turn the engine switch to the OFF position.
OFF
3. If the fuel tank is equipped with a valve, turn the fuel valve to the
CLOSED or OFF position.
ENGLISH
O O P P E E N N
M M I I N N
THROTTLE LEVER
OFF
ENGINE SWITCH
. .
5