Setting Engine Speed; Stopping The Engine - Honda GXR120 Owner's Manual

37ZDJ8040.fm 5 ページ ２０１９年１１月１２日 火曜日 午前１０時３５分
6. Pull the starter grip lightly until you feel resistance, then pull briskly in
the direction of the arrow as shown below. Return the starter grip
gently.
Do not allow the starter grip to snap back against the engine. Return it
gently to prevent damage to the starter.
7. If the choke lever was moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine warms
up.
(Float type)
CHOKE LEVER
OPEN
(Diaphragm type)
CHOKE LEVER
OPEN

SETTING ENGINE SPEED

Position the throttle lever for the desired engine speed.
For engine speed recommendations, refer to the instructions provided
Direction to pull
with the equipment powered by this engine.
STARTER GRIP

STOPPING THE ENGINE

To stop the engine in an emergency, simply turn the engine switch to the
OFF position. Under normal conditions, use the following procedure.
Refer to the instructions provided by the equipment manufacturer.
1. Move the throttle lever to the MIN. position.
OPEN
2. Turn the engine switch (applicable types) to the OFF position.
OPEN
OFF
3. If the fuel tank is equipped with a fuel valve or a fuel filler cap with a
ENGLISH
THROTTLE LEVER
(on the equipment)
THROTTLE LEVER
(on the equipment)
vent, turn them to the CLOSED or OFF position.
MIN.
MAX.
MIN.
OFF
ENGINE SWITCH
(applicable types)
5