Audio Setting - Toshiba BDX1200KE Owner's Manual

• [Video Adjust]
1. Press OK .
2. Press / to adjust the video
{Brightness} - press
the brightness of display, goes left
means dark and right means bright.
{Contrast} - press
the contrast of display, goes left
means low contrast and right means
high contrast.
{Hue} - press
of display, goes left means low hue
and right means high hue.
{Saturation} - press
the saturation of display, goes left
means low Saturation and right means
high saturation.
3. Press RETURN to exit.
Brightness
Contrast
Hue
Saturation
Change
• [Sharpness]
Select the level of sharpness: High,
Middle, Low
{High} - Select High sharpness level
{Middle} - Select Middle sharpness
level
{Low} - Select Low sharpness level
[Motion Video Process]
Display Setting
Video Mode
TV
Video Process
Motion Video...
Move cursor key to select menu option
then use "OK " key to select
• [Video Mode]
Select the output mode of video,options
include: Standard, Vivid, Smooth, these
can change the output display.
{Standard} - output video signal without
any processing and in standard mode.
{Vivid} - output video signal in vibrant
colour mode.
{Smooth} - output video signal in
smooth mode.
/ to adjust
/ to adjust
/ to adjust the Hue
/ to adjust
RETURN Exit
Standard
SETUP Exit

Audio Setting

1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [Audio Setting],
then press .
3. Select an option, press
Audio Setting
Audio Output
Spdif
HDMI
Down_samp
DRC
Move cursor key to select menu option
then use "OK " key to select
4. Press to select a setup option and
/
press
5. Select the setting you wish to change
- Press to return to the previous
menu.
- Press SETUP to exit the menu.
[Audio Output]
• [Spdif]
Select the output mode of COAXIAL
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output digital signal
without any processing.
{PCM} – Output digital signal with
processing, only two channels export.
{Re-encode} – Auto select signal type
from COAXIAL jack according to the
Audio stream on disc.
{Off} – No output for S/PDIF.
• [HDMI]
Select the output mode of HDMI Out
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output HDMI digital
signal without any processing.
{PCM} – Output HDMI digital signal
with processing, only two channels
export.
{Re-encode} – Auto select signal type
from HDMI Out jack according to the
Audio stream on disc.
{Off} – No output for HDMI.
• [Down_samp]
Select the digital audio signal sampling
frequency.
{48K} – For discs recorded at sampling
rate of 48 kHz.
{96K} – For discs recorded at sampling
rate of 96 kHz.
to access.
PCM
PCM
48K
Auto
SETUP Exit
19