Power Saving Mode - Samsung Galaxy Tab 2 7.0 User Manual

Mounting an SD Card
1. Install an SD card. For more information, refer to
"Installing a Memory Card" on page 13.
2. From a Home screen, touch
➔ Storage.
3. Touch Mount SD card.
Unmounting an SD Card
1. From a Home screen, touch
➔ Storage.
2. Touch Unmount SD card.
3. At the prompt, select OK to safely unmount the memory
card.
4. Remove the SD card from the slot. For more
information, refer to "Removing a Memory Card" on
page 13.
Note: Unmounting an SD card may stop some applications
from functioning. The applications may not be available
until you mount the SD card again.
Apps ➔
Settings
Apps ➔ Settings
Formatting an SD Card
When formatting an SD card you will want to backup your
music and photo files that are stored on the card because
formatting the SD card deletes all the stored data.
1. From a Home screen, touch
➔ Storage.
2. Touch Format SD card and then touch Format SD card
again on the warning screen.
3. Touch Delete all.

Power Saving Mode

When enabled, your device automatically adjusts CPU
performance and the brightness to conserve battery power.
1. From a Home screen, touch
➔ Power saving mode.
2. On the Power saving tab, touch the OFF / ON icon
to turn Power saving on or off.
3. Turn Power saving on and touch the Power saving
mode settings (CPU power saving or Screen power
saving) to enable or disable them.
4. Touch Learn about power saving to display more
information about saving power.
Apps ➔ Settings
Apps ➔ Settings
Settings 121