Philips DVP720SA Service Manual page 7

DISMANTLING INSTRUCTIONS
Dismantling of the DVD Loader
1) The tray can be manually open by inserting a minus
screw driver and push the lever in the direction as shown
in Figure 1 to unlock the tray before sliding it out.
2) Slide out the tray and remove the Tray Front assembly
(pos 110 + pos 111) as shown in Figure 2.
2-1
3) Loosen 5 screws to remove the Cover Top (pos 240).
- 1 screw each on the left & right side
- 3 screws on the rear
4) Loosen 4 screws B (see Figure 4) to remove the DVD
Loader.
Figure 1
Figure 2
Dismantling of the AV Board, SD6.1 PL 6CH Board and PSU Board
1) Loosen 7 screws A (see Figure 3) and uncatch 2 catches
C1 (see Figure 4) to remove the AV Board (pos 1001).
2) Loosen 4 screws D (see Figure 4) to remove the SD6.1
PL 6CH Board.
2-1
3) Loosen 2 screws E and uncatch C2 (see Figure 4) to
remove the PSU Board (pos 1004).
Figure 3
Figure 4