Console Redirection Settings; Flow Control - Gigabyte GA-7PESH3 User Manual

COM1/Serial Port for Out-of Band Management / Windows Emergency
Management Service (EMS)
Console Redirection
Select whether to enable console redirection for specified device. Console redirection enables users to
manage the system from a remote location.
Options available: Enabled/Disabled. Default setting is Disabled.

Console Redirection Settings

Terminal Type
Select a terminal type to be used for console redirection.
Options available: VT100/VT100+/ANSI /VT-UTF8.
Bits per second
Select the baud rate for console redirection.
Options available: 9600/19200/57600/115200.
Data Bits
Select the data bits for console redirection.

Flow Control

Flow control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are
full, a 'stop' signal can be sent to stop the data flow. Once the buffers are empty, a 'start' signal can be
sent to re-start the flow. Hardware flow control uses two wires to send start/stop signals.
Options available: None/Hardware RTS/CTS.
Options available: 7/8.
(Note) Advanced items prompt when this item is defined.
(Note)
- 63 - BIOS Setup