Whirlpool 920 Series Use And Care Manual page 6

Starting a wash cycle
1. Load the dishwasher. See the "Loading 5. Close door firmly until it latches.
Your Dishwasher" section. -
2. Spin the spray arms. They should
turn freely.
3. Add detergent. See the "Using the
-Dispensers" section.
4. Add rinse agent, if needed.
6. Run hot water at the sink nearest the
dishwasher until water is hot.
Turn water off.
7. Press a Cycle pad. If desired, press one
o-me,
R
or more Option pads. See the
=
- -
"Setting the Controls" section.
The dishwasher starts filling
once you press a cycle pad
unless you select the delay
wash cycle. You may press Option pads
as the machine is filling.
The pad indicator glows red when a cycle
I or an ootion is selected.
Stopping the dishwasher
You can stop your dishwasher anytime
during a cycle. All you have to do is:
l
Open the door slightly. Wait for any filling
or spraying action to stop before opening
the door all the way. Close door to
continue cycle.
OR
l
Press Cancel/Drain. Once pressed, a
2-minute drain starts. See the "Setting the
Controls" section.
6
-