Understanding The Status Indicators - Whirlpool 920 Series Use And Care Manual

Understanding the status indicators
Lock Out
Rinsing
The Lock Out feature lets you lock out the
The Rinsing indicator glows during the last
function of the control
pads.
When using Lock
Out, you cannot start
the dishwasher.
two-rinses of aii cycles.
To use Lock Out:
l
Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator glows.
To turn off Lock Out:
l
Press and hold Air Dry (about
5 seconds) until the Lock Out
indicator turns off.
Washing
The Washing indicator glows at the start
wash.
Water Heating
The Water Heating indicator glows whenever
dishes are not as dry as you expected when
using Air Dry, either allow longer drying
times (overnight) or do not use Air Dry.
Clean
The Clean indicator glows at the end of a
cycle to show that the
load is clean All other
indicators turn off. The
Clean indicator alows
until you press Cancel/Drain or anyother
control pad.
- water is heated during a
cycle.
16