Watching Tv - Sony KP-57WV600 Instructions Manual

DA4X.book Page 56 Thursday, October 10, 2002 4:35 PM

Watching TV

z
For a complete list of all
the functions of the remote
control, see pages 47-52.
56
To Do This ...
Activate the remote control to
operate the TV
Turn on/off the TV
Tune directly to a channel
Adjust the volume
Mute the volume
Alternate back and forth
between two channels
Display the current channel
number (and other information)
Switch the TV's input to the
VCR, DVD player, or other
connected equipment
Change video and audio
options, customize the TV's
setup, set parental controls, and
more
Switch the TV's input between
sources connected to the TV's
VHF/UHF and AUX inputs
Do This ...
Press TV FUNCTION
Press TV POWER
Press 0-9 and then ENTER (or wait 3
seconds) or
Press CH+/-
Press VOL +/-
Press MUTING (press again to unmute)
JUMP
Press
The TV alternates between the current
channel and the last channel tuned.
Press DISPLAY once to display the channel
number, current time, and channel label
(if set). Press DISPLAY again to turn Display
off.
Press TV/VIDEO repeatedly to cycle through
the video equipment connected to the
TV's video inputs.
Press MENU to display the Menu. For
details, see "Using the Menus" on
page 71.
Press ANT to alternate between sources
connected to the TV's VHF/UHF and
AUX inputs.