DA4X.book Page 32 Thursday, October 10, 2002 4:35 PM
Satellite Receiver
Using
S VIDEO jacks?
See page 25.
TV
32
To connect a satellite receiver
1
Connect the satellite antenna cable to the satellite receiver's
satellite input jack.
2
Use an A/V cable to connect the satellite receiver's A/V output
jacks to the TV's A/V input jacks.
3
Connect a CATV cable from your cable or antenna to the TV's
VHF/UHF jack.
4
Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 43.
A/V cable
Satellite receiver
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
CATV cable
Satellite antenna
cable