GE 26936 User Manual page 44

Problem
Dial tone is OK, but
can't dial out
Handset does not ring
You experience static,
noise, or fading in
and out
Unit beeps
Memory Dialing
44
Solution
• Make sure the tone/pulse setting is programmed
correctly.
• Make sure the RINGER switch on the handset is turned
to ON.
• You may have too many extension phones on your
line. Try unplugging some phones.
• See solutions for "No dial tone. "
• Change channels.
• Is handset out of range? Move closer to the base.
• Does the base need to be relocated?
• Charge battery.
• Make sure base is not plugged into an outlet with
another household appliance.
• Place handset in base for a maximum of 20 seconds to
reset the security code. If that doesn't work, charge
battery for 12 hours.
• Clean charging contacts on handset and base with a
soft cloth, or an eraser.
• See solutions for "No dial tone. "
• Replace battery.
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
• Make sure the tone/pulse setting is programmed correctly.
• Did you reprogram numbers into memory after power
outage or battery replacement?