Cleaning The Trimmer - Philips Norelco 1190X Instructions Manual

ENGLISH
34
C
11 Slide the retaining frame back into place
('click').
C
12 Reattach the shaving head holder to the
bottom part of the shaving unit.

Cleaning the Trimmer

Clean the trimmer after each use.
1 Turn shaver ON with trimmer attached to
shaver.
C
2 Rinse the trimmer under hot water. BUT
C F
BE CAREFUL TO TEST WATER FIRST SO
AS NOT TO BURN OR SCALD HANDS.
3 Remove trimmer from shaver and allow to
air dry.
Tip: For optional trimmer performance, lubricate
the trimmer teeth with one drop of mineral oil
every 6 months.
Cleaning the Jet Clean Canister
(1180XCC/1160XCC)
For optimal performance of the Jet Clean
System, it is recommended that you empty the
cleaning solution canister and thoroughly rinse
the canister clean every 2 weeks.
1 Place the Jet Clean System on a flat, level
surface.
C
2 Simultaneously press the buttons located
on both sides of the Jet Clean System
2
(1) and lift the appliance off the Jet Clean
1
canister (2).
Always remove appliance from canister by lifting
straight up. Do not tilt Jet Clean System.
C
3 Discard any remaining cleaning solution in
the canister.
The cleaning solution can be safely poured down
the sink as there are no harmful ingredients.
C
4 Simply rinse the canister with warm water.
Wipe the canister with a towel or tissue
to remove excess water.
ENGLISH
35