Advertisement
Quick Links
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, ICC
A117.1and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the
Federal Safe Drinking Water Act
• ADA
for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
3"
(76mm)
4-3/16"
2-1/4" (57mm)
(107mm)
esct. dia.
QUICK CONNECT
HOSE ASSEMBLY
Rev 9/11
8"
(204mm)
Lift
Rod
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
Two Handle Widespread
Lavatory Faucet
Models: T6520 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
5-1/4"
(134mm)
9"
(229mm)
5-13/16"
(148mm)
5-1/8
(130mm)
1-1/2" (38mm)
MAX. DECK THICKNESS
1-11/32"
(34mm)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
ICON™
www.moen.com
Advertisement
