Display Language - Canon iR2020 Easy Operation Manual

AUTO DRAWER SELCT
COMMON SETTINGS
6.AUTO DRAWER SELCT
REG. PAPER TYPE
COMMON SETTINGS
7.REG. PAPER TYPE
ENERGY IN SLEEP
COMMON SETTINGS
8.ENERGY IN SLEEP
TRAY DESIGNATION
COMMON SETTINGS
9.TRAY DESIGNATION
BYPASS STD SET
COMMON SETTINGS
10.BYPASS STD SET
PAPER FEED SWITCH
COMMON SETTINGS
11.PAPER FEED SWITCH

DISPLAY LANGUAGE

COMMON SETTINGS
12.DISPLAY LANGUAGE
ADF DIRTY ERROR
COMMON SETTINGS
13.ADF DIRTY ERROR
INIT. COMMON SET.
COMMON SETTINGS
14.INIT. COMON SET.
You can set the paper drawers to be used for Automatic
Paper Selection and Automatic Drawer Switching. This
setting can be made separately for copy, printer, and fax.
You can set the paper type you use in the drawer.
You can select the power consumption when the machine is
in the Auto Sleep mode between the two levels: <HIGH> and
<LOW>.
You can select the function for two output trays (Tray A and
Tray B) of the optional Inner 2 Way Tray-E1 or Additional
Finisher Tray-C1 to be used.
Set the standard paper size and type for the stack bypass
if you always use the same paper size and type. You do not
need to select the paper size and type each time you use the
stack bypass.
You can switch the paper feed method for paper loaded in
the machine. This is useful when you want to make one-
sided or two-sided prints on preprinted paper (paper which
has logos or patterns already printed on it) without changing
the orientation of the paper loaded in paper source.
You can select the language displayed on the LCD display.
You can set this function to ON to display the error message
on the LCD if there is dust in the feeder.
You can restore all the Common Settings to their defaults
(initial settings).
Additional Functions
16